Setup HP DeskJet Printer with CLI5476 Terminal
Updated 10/01/96

HERE HOW THE DESKJET IS SETUP WITH THE 5476 TERMINAL:

1. HOLD DOWN THE SPACE BAR AND POWER UP THE 5476
2. CURSOR TO CUSTOMIZE WORKSTATION AND HIT ENTER
3. MAKE SURE PRINTER SESSION IS SET TO 5224 BY PUTTING CURSOR OVER "5224" AND HIT THE SPACE BAR. (MAKE SURE YOUR HOST IS SET PROPERLY)
4. HIT THE COMMAND-3 KEY BACK TO MAIN MENU
5. CURSOR TO PRINTER CONFIGURATION AND HIT ENTER
6. CURSOR TO OTHER PRINTER AND HIT THE SPACE BAR
7. HIT THE COMMAND-10 KEY TO GO TO THE PRINTER SUPPORT SCREEN
8. WE WILL NOT MODIFY ANY ITEMS ON THIS SCREEN. HIT COMMAND-8 TO GO TO THE NEXT SCREEN.
9. CURSOR TO THE 6 LPI LINE AND ENTER THE FOLLOWING CODES: 1B 26 6C 36 44
10. CURSOR TO THE 8 LPI LINE AND ENTER THE FOLLOWING CODES: 1B 26 6C 38 44
11. CURSOR TO THE 10 CPI LINE AND ENTER THE FOLLOWING CODES: 1B 28 73 31 30 48
12. CURSOR TO THE 15 CPI LINE AND ENTER THE FOLLOWING CODES: 1B 28 73 31 37 48
13. CURSOR TO THE nn LINES PER PAGE LINE AND ENTER THE FOLLOWING CODES: 1B 26 6C FE 50
14. NO OTHER CODES ARE NEEDED FOR THIS CONFIGURATION. IT IS NORMAL TO ONLY USE A LIMITED NUMBER OF OPTIONS AVAILABLE.
15. HIT THE COMMAND-3 KEY THREE TIMES TO GO ON-LINE AND SAVE THE SETUP.