- Download Pumpkin TFTP server:
  http://klever.net/kin/canned/PumpKIN.exe.

- Save the downloaded file into a temporary directory.

- Run this program and it will install into your PC into the following location:
  Programs/Accessories/Klever Co

- Run the TFTP program.  Click:
  START/Programs/Accessories/Klever Co/PUMPKIN

- MAKE SURE you set the following "OPTIONS" in the Pumpkin software:
  - TFTP file system root = C:\
  - Allow access to sub directories = yes
  - Give all files = yes

Note: If you have a personal firewall on the PC you are installing Pumpkin, be sure to
      open port 21 or specify the application as an allowed exception.

- Expand the ET2000 firmware file.

- Put all three of our update files a new directory:  c:\et2000.

- Do the update on the ET2000:
  - tell the ET2000 where the TFTP server is at: 
	- hold the space bar and power on
	- Offline-Setup/Customize workstation/Network Settings/TFTP server
	- enter the IP address of the PC running Pumpkin 
	- exit Offline-Setup
  - go back into Offline-Setup (power off/on with space bar down)
  - press ALT+F1 to start the flash update process
  - you will see the progress bar during the update and a notice when complete