ET5000 PLE133/CLE266, MT1200/1500 GX533 release notes

2005.12.9 E5502.3
1. english version
2. ICA 9.04

2005.12.2 E5502J.2
1. japanese version only
2. termpro v1.0.4.158

2005.11.11 E5502.1, E5502J.1 and J5502.1
1. fix when modify the LPD Queue Name or port or formfeed, if the "Enable LPD" is 
  checked, must check off and re check on again(exit configuration dialog)
2. add screen saver protect, the security must enable
3. termpro
  fix the TN5250 decode the Dbcs user font sometimes cause exception
4. fix when launch a PNAGENT session, the "Connection Manager" missed the selected 
  focus

2005.10.26 E5501.9, E5501J.9
1. fix when after patch Microsoft WCE 5.0 QFE 050623_KB899183(USB qfe), hung on 
  some ET5000/CLE266 platform from version E5501.5-8(E5501.4 didn't do ms qfe yet)

2005.10.24 E5501J.8
1. japanese version

2005.10.19 E5501.8, R1201.8
1. fix local application(termpro, browser) lost focus after screen saver on 
  "Connection Task Bar" mode 
2. fix browser lost focus when session switch

2005.10.17 E5501.7
1. add a control applet "eGalax TouchKit" for eGalax controller base touch screen
2. fix the local French 122 key '=' mapping to 'a'
3. fix the when press alt key, the menu key didn't work on local application, 
  like termpro and browser
4. support when change 3 ip values(dhcp<->static ip, mask and gateway), no reboot 
  needed
5. support device check out(shutdown), need SnmpAdm 2.0.190.15

2005.10.6 E5501.6
1. beta build only
2. fix AltGr bug on local input from version E5500.L
3. add 6 locale support
  Italian, Latin American, Swiss German, Portuguese, Dutch and Danish
4. add 2 system locale support 
  Czech and Portuguese
5. support eGalax controler base touch screen, serial and usb interface
  this version is no configuarion support, need customer confirm and modify the 
  "Touch Screen" configuration

2005.9.23 E5501.5
1. fix the "Advanced DHCP" can't save option is if option id changed
2. termpro 1.0.4.157
 a.) fix dialog "Open Macro" when "Run after opened" didn't checked, 
  the macro can't be selected(active)
3. support auto device check in by DHCP option
  -) a new option "SNMP Manager Ip" on dialog "Advanced DHCP Options/Gerenal", 
     the default option is 150, and type is IP(not string).
  -) the default value of "SNMP Manager Ip" is not enabled, but when the value  
     of "SNMP Manager Ip" on "Terminal Properties/Upgrade" is not set(0.0.0.0) 
     and      the Dhcp server had set the "SNMP Manager Ip" option id, then 
     "SNMP Manager IP" will assign
4.Test steps:
 -)add a dhcp option id=150, type=IP and value=your SnmpAdm ip address on your 
   dhcp server
 -)launch SnmpAdm, make the device is disapear on client window
 a.
 -)set device "SNMP Manager IP"="0.0.0.0", please see point 2 for explaining
   if the value <> "0.0.0.0", no auto device in
 -)do a auto/manual upgrade to E5501.5, don't use SnmpAdm upgrade, because the 
   device is appear on SnmpAdm client window, so you will not see the "new icon"
 -)after upgrade, reboot device
 -)look at the client windows

 b.
 -)upgrade to E5501.5 and reset to default 
 -)look at the client windows
  
2005.9.14 E5501.4
1. fix SnmpAdm show "MT1500" to "OmniTerm/W160" for Nlynx
2. new VIA usb wireless driver

2005.9.8 E5501.3
1. fix rdp/ica session default locale wrong(should be FR but EN) when 
 input locale set as French(122) or Uk English(122)
2. termpro 1.0.4.156
 -). add disable record macro feature
   add a dword value "Disable Record":dword=1 
   on key "HKEY_LOCAL_MACHINE\Software\MAPLE\WinTerm"
     

2005.9.5 E5501.2
1. english version

2005.9.2 E5501J.2
1. japanese version
2. new termpro splash screen for japanese version only
3. fix 101 keyboard Alt+PageDown is equal Alt+Ctrl+Down(the WBT toggle 
   session hot key)

2005.8.31 E5501.1
1. new cisco acu 2.6
2. termpro 1.0.4.155
  -). add "Windows" menu, support hot key for jump between sessions
  -). add key remapping for jump session hot keys
      the default "Jump to next session" is Alt+PageUp 
      and "Jump to previous session" is Ctrl+PageUp

2005.8.16 E5500.U, R1200.U 
-the release is a addtional release notes on 2005.8.2 lost
1. support auto device check-in, need SnmpAdm V2.1.190.10

2005.8.2 E5500.U R1200.U
1. new smartcard reader driver, fix the smartcard reader didn't work
2. turn off the the key click sound on default, it cause the key stroke 
   slow and magtek reader slow on MT1500 serial
3. termpro 1.0.4.150
 -). fix 3270 with associated printer and multi-hosts bug
 -). keymap support remapping Ctrl key now
 -). fix keymap didn't save Alt key if Alt key changed
4. support change "SNMP Manager IP" and not reboot required, the old 
   version need reboot
5. fix rdp desktop resoultion bug when change display resolution

2005.7.12 E5500.T
1. remove viewer configurations if upgrade to .R or .S code, 
   because the lincese fed required, special version required
2. fix wrong numlock status, the light is on but the rdp/ica is off
3. fix the 'alt' key didn't release when press alt+jump on 122 keyboard
4. new VIA usb wireless driver, fix when disable broadcast SSID, it can't 
   connect
  -the E3U USB had problem when set WPA-PSK and disable SSID, it didn't 
   connect also but the VIA do   

2005.7.8 E5500.S
1. add "Viewer" icons
2. change auto config file name form 'SnmpAutoConfig.sac' to 
   'SnmpAutoConfig5.sac'
3. add detect the ftp server is alive on auto config
4. termpro v1.0.4.149
 -fix the keep alive(NOP) didn't work on specify condition
5. support 1600x1200, but not all 1600x1200 formats support

2005.6.29 E5500.R
1. add "Microsoft File Viewer" connection type, support local file viewer

2005.6.15 E5500.Q, R1200.Q E5500J.Q
1. auto upgrade bootloader "ML050606" on MT serial for support 1280x1024x32
2. change resolution and color depth now depend on video memory size
3. termpro v1.0.4.148
 -) fix memory leak on reconnect
 -) Hot spots: F13-F24 function as F1-F12
 -) the message on reconnect dialog is blank(set as manual reconnect)
 -) connection wizard UI modified for japanese localization
4. "Model" shown in SNMPADM for version e5500.p is always "MT1200" 
5. fix the "Port" on "Device/Touch Screen" dialog on version R1200 is 
   empty, now always show "USB"

2005.6.3 E5500.P, R1200.P, E5500J.P
1. fix the test screen didn't work on MT1200 model(AMD GX2 platform) 
2. fix "slide show" screen saver didn't work(show garbage or no graphic) 
   on 32 bit display mode
3. add "Wirless Network" control panel, if want to avoid user to config 
   the WZC(Wireless Zero Configuration),  please uncheck the checkbox 
   "Notify me when new wireless networks are available"
4. fix the keyboard remapping of termpro show garbage
5. remove printer session of termpro on japanese version

2005.5.25 E5500.N, R1200.N
1. fix termpro numlock remapping can't work
2. fix the AltGR of usb keyboard, see E5500.L release notes
3. fix can't save the touch screen com port config, 
 and avoid the new Elo touch screen and 3M micro touch conflict
4. fix the E5500.L/.M wrong chars on upgrade dialog
5. support kiosk mode, the usage is like wyse
6. remove the context menu(the right button click) on IE, can enable on 
   registry patch
7. fix the rdp cursor bug
8. new gx2 display driver, fix the MT1500/1200 rdp focus rect bug 
9. auto login support timeout value config, can add a registry dword 
   value on key "HKEY\Wbt\User\user, and "AutoLoginTimeout":dword=5(second), 
   0 means disable auto count-down

2005.5.20 E5500J.M
1. japanese version

2005.5.19 E5500.L, R5500J.L
1. surrport Wistron USB 802.11b wireless
2. remove AltGR mapping to ALT+CTRL, it can avoid altgr+3 for the 
   microsoft office, because the alt+ctrl+3 is used for office

2005.5.13 E5500J.K
1. fix wrnog ftp server when do manual upgrade, the status window is loging,
  and after close the status window, we can't do another manual upgrade 
  (the status window never show up)
2. termpro
  .)wrong undeline color when grid line attribute set

2005.5.9 E5500J.J
1. new ELO serial port touch screen driver and add ELO USB touch screen support
2. user font download for japan

2005.5.02 E5500.J
1. fix the web connection can't change the connection name
2. fix numlock on boot for MT1200 didn't work
3. fix the upgrade dialog wrnog message(english version only)
4. support ELO USB touch screen, automatic reset to default

2005.4.29 E5500.I E5500J.I
1. fix ET5500(CLE266) audio repeat bug
2. change screen saver "floating object" default bitmap as windows powered
3. set default screen resolution to 800x600x32@60 for all platform, the 
   early version is only for MT1200
4. termpro v1.0.4.139
 -fix 3270 printer session/Control dialog can't show up, need press ALT
 -change the under line & seperator color to match font color
 -fix when after modify keypad, enter termpro connection wizard and ok, the 
  keypad configurations lost

2005.4.19 E5500J.G
1. japanese version
2. ICA 8.34
3. termpro v1.0.4.135
4. some localizing for japanese

2005.4.0x E5500.G R1200.G

2005.3.31 E5500.F R1200.F
1. fix MT1500 some dhcp bugs
2. fix when screen saver bitmap > screen resoulation, the system hang
3. ICA 7

2005.3.25 E5500J.F
1. japanese version
2. ICA 8.34
3. fix "Remote Display" can't work(jp version only)
4. fix when security enable, and a user had change password right, the 
   login dialog always show the change password dialog
5. fix 5250 can not input 'I' on Sign On screen

2005.3.22 E5500J.E 
1. japanese version
2. japanese UI, need check

2005.3.18 E5500.E MT1200 R1200.E
1. fix the network speed can't set
2. fix F7 on termpro can't work
3. fix when termpro keypad activate, can't change session correctly
4. fix when mouse cursor move in/out termpro keypad, the cursor isn't a arrow 

2005.2.24 E5500J.C
1. fix rdp connection can't save password when auto connect enabled
2. termpro TN5250 support grid line for japanese version only

2005.2.16 E5500J.B
1. fix cisco acu can't run on japanese version
2. fix memory report 216 when 256m installed
3. fix rdp keystrokes(PgUP, LEFT... when numlock) not work properly when 
   brower to www.yahoo.com on win2000 server
4. termpro v1.4.0.125
 a.)support auto enter ime when on dbcs field

2005.2.5 E5500J.A
1. change japan pocket ime to microsooft ime3.1, need reset to default
2. termpro support japan codepage 930 & 939

2005.2.2 E5500.9
1. the E5500.8's ICA version is Japan, change to english
1. fix snmp detect MT1200 model wrong

2005.1.28 E5500.8
1. fix set timezone by Dhcp 216/141 not work
2. support MT1200
3. termpro v1.0.4.124
4. support upgrade ET5000(DDR) BIOS, MT1200 BLDR
5. RDP sound poor
6. new ET5000 ce5.0 display driver

2005.1.18 E5500J.7
1. termpro v1.0.4.123
  a.)fix auto terminated when connect to invalid host 
  b.)add caret Blinking/No Bliking, and variable caret(control by emulation)
  c.)ASCII double width double height bug
  d.)TN3270 add message when disconnect 
  e.)TN5250/3270 printer for JP dbcs

2005.1.6 E5500J.6
1.fixed on ET5500J.6 but E5500.5 not
 a.)termpro v1.0.4.122
   -all emulations support japanese
   -fixed copy/paste bugs

2004.12.20 E5500.5
1.fixed on E5500.5 but E5500.4 not
 a.)fixed www.citybank.com can't login
 b.)support netgear MA401 11b wireless
 c.)fixed the media player play the any movie is too bright
 d.)the wireless key is need retyped when reboot
2.need do manual reset to default after upgrade firmware
 
2004.11.10 E5500.4
1.vnc support
2.EBOOTD support
3.fixed on E5500.4 but E5500.3 not
 a.)DHCP retain did not auto respond
 b.)Failover did not work
 c.)changed WBT Setup Wizard: change display page, remove printer page and 
    add terminal name page
 d.)Auto-firmware-update
 e.)add Cisco ACU 2.5
 f.)hidden C3 processor power cpl
 g.)Screen saver, floating object:If select Floating object, user interface 
    allows you to select NK.BIX or another
4.need do manual reset to default after upgrade firmware

2004.10.15 E5500.1
1. first beta version
2. new bootloader
 a.)support compressed and uncompressed bin file, the compressed file extension is
    nk.bix and uncompressed file is nk.bin
 b.)improve load speed
 c.)the boot logo can support 8 bits and 24 bits bitmap file
 d.)can support eboot(like et3000, but when the disk is bad, it's not work, 
    it only can work on upgrade failed(the nk.bin miss), next beta version support
 e.)the disk format need rebuild, tool and steps will include
3. wince.net version 5.0
 a.) support both VIA platform, PLE133 and CLE266
 b.) this nk file is 20m bytes, and compress it to 13m bytes, need new bootloader 
 c.) change firmware upgrade method, the "manifest.dub" now change to "wcev550.dub"
 d.) support 3 types of 802.11b, cisco airnet 350, 
     intersil prism2: Microsoft MN-520,Linksys WPC11, Netgear MA401(no card to test)
     and realtek 8180(we test ok)
 e.) citrix ICA v80768678
4. steps for making new disk format with new bootloader
 a.)tools and files:
   bldr, cesys.exe, bsect.img, mkdisk.bat, attrib.exe, bincompress.exe
   (window console tool)
 b.) steps
  -boot from usb disk
  -save reg.psi 
  -save vialogo.bmp or use a new logo file, under window console(DOS box), 
   run bincompress /C vialogo.bmp splash.bmx
  -save nk.bin
  -delete all files, include bootload.bin, vialogo.bmp, nk.bin, bfat1216.bin, 
   reg.psi. reg.dat, reg.da0 and others
  -scandisk c:
  -mkdisk c:
  -restore reg.psi
  -restore the splash.bmx(build with bincompress.exe)
  -restore nk.bin or nk.bix(bincompress /C nk.bin nk.bix)
  -reboot